B&K AVP1030 - Manual (Page 14)

Page 12
Remote control
The B & K A/V system remote control is specially designed to streamline functions.
Although you can choose to use a universal remote, we think you will agree that the
remote shown below is simple and easy to learn.
Most buttons on the remote control are duplicated through the front panel. This means
it’s easy to operate the preamplifier, whether you prefer using the remote control or the
hands on approach from the front panel. We recommend using the remote control for
simplicity. Use the table below to familiarize yourself with the remote controls functions.
Button: Function:
POWER OFF Turns power and CTRL OUT off
POWER ON Turns power and CTRL OUT on
SYSTEM MUTE Suppresses sound output
V1 Selects audio/video from component V1
TV-V3 Selects audio/video from component TV-V3
FX Lets you select between the standard Direct mode or
the last used surround mode
V2 Selects audio/video from component V2
TAPE Selects audio from component TAPE
VLD Selects audio/video from component VLD
TUNER Selects internal TUNER
CD Selects audio from component CD
FREQ Lets you directly tune in a station frequency by
specifying it with the numeric keypad
BAND Selects AM or FM frequency band
STATION -/+ Selects station preset by moving up (+) or down (-)
TUNE -/+ Manually tune a station by moving the frequency up (+)
or down (-)
BALANCE L/R Adjusts left/right level balance for front and rear
channels (inactive for Pro Logic and Dolby Digital
modes)
MASTER VOLUME - Lets you decrease (-) or increase (+) the volume on all
/+ channels