Bendix Commercial Vehicle Systems BLINDSPOTTER TROUBLESHOOTING GUIDE - Manual (Page 19)

Symptom Isolation Procedures
Side Sensor Contin
uous
Detection T
est
3-7
Side Sensor Continuously Detecting
Targets
Overview
This symptom driven test is performed when the system
continuously detects objects.
Detection
The symptom is observed by the driver when sensor continuously
detects targets.
Fallback
There is no fallback mode for this symptom. The Sensor will not
operate properly.
Required Tools
• None
Possible Causes
This fault code can be caused by any of the following:
• Sensor
• Operator Display Unit
Harness
P2 SOD
Operator
Display Unit
(ODU)
Sensor