Removal / disassembly – Bendix Commercial Vehicle Systems EB/ES BRAKES SERVICE MANUAL User Manual
Page 24
23
ES-150-4L and EB-150-4L Brakes
1. Perform steps in removal/disassembly : drum removal
2. Using a large screwdriver or lever, lift upper shoe to stretch
return spring.
3. Remove upper roller.
4. Report steps 2 through 3 to remove lower roller.
5. Stretch shoe return spring and unhook it from upper shoe web.
Refer to Figure 16.
Figure 16. Shoe Return Spring Removal
6. Rotate shoe downward and turn to allow disengagement of shoe
retaining spring from lower shoe web. Refer to Figure 17.
7. Rotate upper shoe upward and remove shoe and shoe retaining
spring.
8. Clean and inspect remaining brake parts as outlined in Removal/
Disassembly section of this manual.
Figure 17. Lower Shoe Removal
WARNING: The long term effects of non-asbestos fi bers, have
not been determined. Therefore, precautions should be used
when handling these materials.
See General Information / Lining Material Warning
!
Removal / Disassembly
Shoe Removal