Bendix Commercial Vehicle Systems EB/ES BRAKES SERVICE MANUAL - Manual (Page 25)

24
4. Using a lever or large screwdriver, lift upper shoe to remove
roller and retainer as a unit. Refer to Figure 19.
Figure 19. Roller and Retainer Removal
Figure 20. Return Spring Removal
Figure 18. Retainer Loop Removal
5. Repeat Steps 3 and 4 to remove lower roller and retainer
assembly.
6. To remove return spring, position a lever or suitable tool with a
notch to engage spring rod. Refer to Figure 20. Apply downward
force to stretch spring, allowing removal of upper spring hook.
Remove and discard spring.
Shoe Removal
ES-165-7M Heavy-Duty Brake
WARNING: The long term effects of non-asbestos fi bers, have
not been determined. Therefore, precautions should be used
when handling these materials.
See General Information / Lining Material Warning
1. Perform steps necessary for drum removal. See Removal /
Disassembly - Drum Removal.
2. Remove cap screws and dustshield, if applicable.
3. Pry roller retainer coiled loops out of both shoe web holes as
shown in Figure 18. Pivot roller retainer to swing loops clear of shoe
webs.
!
Removal / Disassembly