Calculated Industries 6130 v3.0 - Manual (Page 16)

3) You can continue to add values us-
ing the [M+] key. Press [Rcl] [M+] to
review the total in Memory.
*Note: For count values, you must press
the [Count] key to count your val-
ue. Then press [Rcl] [Count] to
move the count value to the main
display. Press [M+] to add this val-
ue to Memory.
The annunciator “ M ” will display
when a value is stored in Memory.
16 – Scale Master ® II v3.0