Calculated Industries 6130 v3.0 - Manual (Page 9)

Imperial/Metric Modes
The Scale Master II is set up to use
Imperial (English) dimensional
units by default. The Scale Master II
can be set up to use Metric scales
by using the following sequence
:
1) Turn unit off via switch.
2) Press and hold [SUB] key.
3) Turn unit on via switch.
4) Release [SUB] key.
While in Metric mode, MET will re-
main lit in the scale box.
Repeat the procedure above to
switch back to Imperial mode.
U
SING THE
S
CALE
M
ASTER
II
User’s Guide – 9