Calculated Industries 6130 v3.0 - Manual (Page 34)

Error/Auto-Range Function
Error Message – If you make an incor-
rect entry (such as trying to add di-
mensioned and non-dimensioned
values), the Scale Master II will display
the word “
ERROR .” Press [Reset] to clear.
Auto Range Function – If value is too
large to display in the selected units of
measurement, the answer will be dis-
played in the next larger measurement
units instead of showing an error (for ex-
ample: “10,000,000 MM” cannot be dis-
played, so “10,000 M” will be
displayed instead).
Interference
Exposure to direct light or close prox-
imity to cell phones and other elec-
tronic devices may cause interference
with the Scale Master device and result
in erroneous measurements.
A
PPENDIX
34 – Scale Master ® II v3.0