Calculated Industries 6130 v3.0 - Manual (Page 32)

Basic Functions PC
You can send a value using the [Set]
key, then store it as Length, Width,
Height, or in the memory, as you nor-
mally would. Remember, for Height,
press
[Rcl] before pressing [Set] [Sq/Cu]
[Set] .
[Rcl] [Set] [Sq/Cu]
Stores the rolled value as height.
[Set] then [Reset] and [Sq/Cu] simultaneously
Clears the stored height value.
Memory Functions PC
[Reset] and [M+] simultaneously,
then [M+] by itself
Replaces the value previously
stored in Memory with the dis-
played value.
[Reset] and [M+] simultaneously,
then [Sub] and [M+] simultaneously
Replaces the value previously
stored in Memory with the nega-
tive of the displayed value.
32 – Scale Master ® II v3.0