Calculated Industries 6130 v3.0 - Manual (Page 7)

[Sq/Cu] – Area/Volume key
Used to set or view height and
calculate area and volume:
1) The first press of this key calcu-
lates and displays the area us-
ing values stored in the Length
and Width registers.
2) The second press calculates and
displays the volume using
Length, Width and Height.
3) The third press displays the value
stored as Height.
When you press [Set] [Sq/Cu] , you
can set a fixed height. While you
are in the programming mode,
pressing
[Set] will store the value as
height and return the unit to nor-
mal operation.
[Reset]
Used to reset the display. When
pressed simultaneously with another
key, it clears the value of that key
(i.e.,
[Reset] [Length] clears the value
stored in the Length register).
User’s Guide – 7