Calculated Industries 6130 v3.0 - Manual (Page 18)

Programming Mode
The Scale Master II allows you to pre-
set values into frequently used keys,
including:
◆ Custom Scales (4 Imp/4 Met)
◆ Auto-Count distance
◆ +K (Constant) value
◆ Height value
To begin setting values, press the [Set]
key and then the desired key to be pro-
grammed. The following keys are used
in programming mode:
[Scale] advances the cursor to the
next item.
[Mode] moves the cursor back to the
previous item.
[M+] changes the value within an
item.
[Reset] exits the programming mode
without saving any values.
[Set] exits and saves changes.
18 – Scale Master ® II v3.0