Metrohm 895 Professional PVC Thermomat - Manual (Page 16)

2.3 Instrument display
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 ￭￭￭￭￭￭￭￭
895 Professional PVC Thermomat
2.3 Instrument display
895_1
1 2 3 4
9 8 7 6
10 5
Figure 3 Instrument display
1 Measuring vessel cover red
This measuring position is not available for a
determination (determination is running or
multiple determination has not yet been
completed). 2 Measuring vessel cover green
A determination can be started on this mea-
suring position.
3 Instrument name
The instrument name display corresponds to
the configuration in StabNet. 4 Measuring vessel cover gray
This measuring position is not available for
starting a determination (instrument not
connected to computer or no method loa-
ded).
5 Conductivity display block B
Shows the measured conductivity.
Dash (-) is displayed = Conductivity cannot
be displayed (no sensor connected or no
valid measuring signal). 6 Gas flow display block B
Shows the gas flow measured on block B
(gray background: gas flow switched off;
white background: gas flow switched on).
7 Temperature display block B
Shows the temperature measured on block
B (gray background: heater switched off; red
background: temperature not stable; green
background: temperature stable). 8 Temperature display block A
Shows the temperature measured on block
A (gray background: heater switched off;
red background: temperature not stable;
green background: temperature stable).
9 Gas flow display block A
Shows the gas flow measured on block A
(gray background: gas flow switched off;
white background: gas flow switched on). 10 Conductivity display block A
Shows the measured conductivity.
Dash (-) is displayed = Conductivity cannot
be displayed (no sensor connected or no
valid measuring signal).