2 calibration functions, 1 determining the cell constant, Calibration functions – Metrohm 895 Professional PVC Thermomat User Manual
Page 28: Determining the cell constant, Figure 11, Measuring arrangement (schematic representation)
Advertising
4.2 Calibration functions
■■■■■■■■■■■■■■■■■■■■■■
20
■■■■■■■■
895 Professional PVC Thermomat
Figure 11
Measuring arrangement (schematic representation)
1
Reaction vessel
2
Sample
3
Heating block
4
Measuring vessel
5
Conductivity measuring cell
6
Measuring solution
4.2
Calibration functions
4.2.1
Determining the cell constant
The cell constants can be either entered manually or determined automat-
ically by means of a defined standard solution, e.g. the conductivity stand-
ard 100 µS/cm (6.2324.010).
NOTE
You will find detailed information regarding the StabNet computer
program in the Tutorial.
Advertising