4 connecting a computer, Connecting a computer, Figure 9 – Metrohm 895 Professional PVC Thermomat User Manual
Page 25: Figure 10, Instrument display with serial number
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
895 Professional PVC Thermomat
■■■■■■■■
17
Figure 9
Instrument display without instrument name and symbol
The instrument 895 Professional PVC Thermomat is connected to the
computer but the StabNet computer program has been closed.
Figure 10
Instrument display with serial number
The instrument 895 Professional PVC Thermomat has been started, but
the StabNet computer program was not previously started.
3.4
Connecting a computer
3.4.1
Connecting the 895 Professional PVC Thermomat and the com-
puter
NOTE
The StabNet computer program has to be installed before you can
connect the instrument to the computer.
The StabNet computer program allows you to control up to 4 instru-
ments.
Connect and set up the 895 Professional PVC Thermomat as follows:
1 Establish a connection between the USB interface (2-10) of the 895
Professional PVC Thermomat and the required USB interface on the
computer using the USB cable (6.2151.130).
2 Start the StabNet computer program.