Metrohm 895 Professional PVC Thermomat - Manual (Page 33)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
895 Professional PVC Thermomat
￭￭￭￭￭￭￭￭ 25
2 Starting the heater (StabNet)
￭ In the Workplace program part, click on the [Start] button for
Heater within the block A area.
￭ If required, also switch on the heater for Block B.
The color of the temperature display on the 895 Professional PVC
Thermomat changes to red during the heating phase.
The color of the temperature display on the 895 Professional PVC
Thermomat changes to green once the setpoint temperature has
been reached.
Heating period to 120 °C: approx. 45 min.
Heating period to 200 °C: approx. 60 min.
NOTE
If you wish to switch off the heating, click on the [Stop] button.
3 Enter sample identification (StabNet)
￭ Enter the sample identifications Ident and Info 1 - 3 for all sam-
ple positions used.
The entries for Ident and Info 1 - 3 can be selected from the Text
templates.
NOTE
The Info 2 and Info 3 info fields can be activated in the sub-
window Properties - Sample data in the Method program
part.
4 Connecting and inserting reaction vessels
NOTE
The temperature defined in the method has to be reached before
you insert the reaction vessels, i.e., the temperature display has to
be green.
￭ Seal the unused positions with stoppers or empty reaction vessels
for protection against impurities.