Metrohm 840 PC Control 6.0 / Touch Control - Manual (Page 13)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 General
￭￭￭￭￭￭￭￭ 7
Range 1 ... 14
Default value 1
Name
The designation of the favorite is used for unambiguous identification.
Input 24 characters maximum
Type
Definition, whether the favorite is representing a single method or a com-
plete sample data silo.
Selection Method | Sample data silo
Default value Method
Memory
Memory location the method or the sample data silo is loaded from. Only
the currently accessible memory locations are selectable.
Selection Internal memory | Card 1 | Card 2 | Shared
memory
Default value Internal memory
Shared memory
Memory released on an external system. For this an 847 USB Lab Link
is necessary.
Method / Silo
Method or sample data silo of the favorite.
Selection Selection of stored methods or sample data
silos
[More options]
Parameterize the autostart function, see following chapter.
More options
With [More options] the autostart function is parameterized.
Autostart
on | off (Default value: off)
If this parameter is activated, a new determination is started automatically
at the end of a determination. This continues until the quantity specified
has been reached (see Number of autostarts).
Number of autostarts
This parameter can only be edited when Autostart = on.
Number of automatic starts.