1 editing reagent data, 2 reagent monitoring, Editing reagent data – Metrohm 840 PC Control 6.0 / Touch Control User Manual
Page 8: Reagent monitoring
Advertising
1.1 Reagents
■■■■■■■■■■■■■■■■■■■■■■
2
■■■■■■■■
1.1.1
Editing reagent data
Reagent
The designation of the reagent is used for unambiguous identification.
Input
24 characters maximum
Comment
Input
24 characters maximum
[Reagent monitor.]
Set the parameters for the reagent monitoring, see following chapter.
1.1.2
Reagent monitoring
In the dialog Edit reagent / Reagent monitoring the conditions for the
monitoring of the reagent are defined.
If one of the following values is reached, then the reagent has to be
exchanged. The values are checked in the following cases:
Advertising