Metrohm 840 PC Control 6.0 / Touch Control - Manual (Page 7)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 General
￭￭￭￭￭￭￭￭ 1
1 General
1.1 Reagents
Main dialog: System ▶ Reagents
This chapter describes how you can create a list of the reagents used in
the system. Depending on the usage a distinction is made between two
types of reagents:
￭ Reagent for volumetric determinations
￭ Reagents for coulometric determinations
The list of reagents gives the designation and type of each reagent config-
ured.
[New]
Add a new reagent to the list, see following chapter.
[Delete]
Delete the selected reagent from the list.
[Edit]
Edit the data of the selected reagent, see following chapter.