Buffalo Technology WLA-L11 - Manual (Page 14)

WLA-L11 User’s Manual 12
WindowsNT4.0
Make the TCP/IP protocol settings on the settings personal computer using the following procedure.
1 Start the personal computer.
2 Click the Start button, and then select Settings and Control Panel.
3 Double-click the Network icon.
4 Click the Protocols tab, and make sure that
TCP/IP Protocol is displayed in the Network
Protocols field.
If Internet Protocol (TCP/IP) is not displayed, refer to the Adding TCP/IP Proto-
cols (Windows NT 4.0) section (page13).
5
Select TCP/IP Protocol, and click the Proper-
ties button.
Continue to next page