Buffalo Technology WLA-L11 - Manual (Page 24)

WLA-L11 User’s Manual 22
Creation of the application information file is completed.
Continue to "Setting the Wireless LAN Personal Computer" (page 22).
Setting the Wireless LAN Personal Computer
In order to make the communication between the Ethernet LAN and the wireless LAN possible, you must set
the wireless LAN personal computer settings. The wireless LAN personal computer is set using the follow-
ing procedure.
Continue to "AirStation Connection Settings" (page 25).
Installing Client Manager
It is necessary to install Client Manager to communicate with the AirStation. Follow the steps
below to install Client Manager
.
8
In the Save In: field, select 3 ½ " Floppy (A:),
and enter a suitable name such as Airsta-
tion.Apd in the File Name: field. Next, click
the Save button.
1 Refer to the manual supplied with the wireless LAN card install the drivers and
try to set the network settings.
2 Refer to TCP/IP Protocol Settings in the Preparing AirStation Settings the TCP/
IP is set.
The procedure for TCP/IP Protocol Set explains the settings for the Ethernet LAN
on the settings personal computer. The following subjects can be substituted:
LAN board to the wireless LAN card
Settings personal computer to the Wireless LAN personal computer
1 Insert the "AirStation Series Drive CD" into the CD-ROM drive.
2 Click the Start button, and select Run.
3 Enter "D:\WLEASY.EXE (When the CD-
ROM drive is "D") and click OK.