Buffalo Technology WLA-L11 - Manual (Page 38)

WLA-L11 User’s Manual 36
Set the AirStation’s LAN board send mode using the following procedure.
Follow the screen instructions to complete the settings.
Setting Send Mode
1 Refer to the "Displaying AirStation Setting Screen" section (page 29) in Chapter
2, What is Next?, and display the AirStation setting screen.
2
Click the Custom Setup button.
3 In the "Communication Type" field, select
either full duplex or half duplex, and click the
Set button.
When the AirStation’s send mode is set to full duplex, make sure that the send
mode for the connected hub is also set to full duplex. When the send mode for the con-
nected hub is set to Auto Negotiation and half duplex, and the AirStation’s send mode is
set to full duplex, communications will be disabled.