Checking airstation’s ip address – Buffalo Technology WLA-L11 User Manual
Page 40
WLA-L11 User’s Manual
38
You can check AirStation’s IP address validity using the following procedure.
Checking AirStation’s IP Address
1
Refer to the "Installing AirStation Manager" section (page 14) in Chapter 1,
Communications Between Ethernet LAN and Wireless LAN
2
Click the Start button, and then select Programs, MELCO AirStation, and
AirStation Manager.
3
On the Menu Bar, select Edit. Then select
Search AirStation.
4
Windows will search for the AirStation.
5
AirStation’s IP address will be displayed.
AirStation’s IP address will be displayed in the IP Address field.
Reset the AirStation Setting to the Factory Settings
1
Turn ON the power supply to the AirStation.
2
Press and hold the factory setting switch on the back of the AirStation for 3 sec-
onds minimum. The DIAG lamp on the side (bottom) will flash. When the DIAG
lamp stops flashing, the AirStation is reset to the factory setting.
For the factory setting switch, refer to the "Package Details and Parts Nomencla-
ture and Functions" section in the separate Install manual.