Buffalo Technology WLA-L11 - Manual (Page 34)

WLA-L11 User’s Manual 32
To limit connections to the AirStation from a wireless LAN personal computer, use following procedure.
After setting only wireless LAN personal computers that have been registered can communicate with Ether-
net LAN personal computers.
Setting Procedure
Limiting Connections from Wireless LAN Per-
sonal Computers
1 Refer to the "Displaying AirStation Setting Screen" section (page 29) in Chapter
2, What is Next?, and display the AirStation setting screen.
2
Click the Custom Setup button.
3
Click the Wireless LAN Computer Limita-
tion Setup hyperlink.
4
Enter the MAC address of wireless LAN per-
sonal computers that can connect to the net-
work in the Wireless LAN Computer MAC
Address field. Then click the Add button.
• Refer to the manual enclosed with the
wireless LAN personal computer for the
MAC address.
• When entering the MAC address, sepa-
rate each two-digit group by entering a
colon (:) between them.
If the wireless LAN card of your choice on the network is displayed in the Table of
Wireless LAN PCs for which Connection Is Disabled, select the Enable Connection
check box for the relevant MAC address and click the Change button.