Enabling and disabling roaming function, The airstation setting – Buffalo Technology WLA-L11 User Manual
Page 32
WLA-L11 User’s Manual
30
While moving from one room to another using one roaming function, you can switch AirStations without
new setting automatically. Set the roaming function can be set using the following procedure.
Be sure to set the roaming function from a personal computer on the Ethernet LAN. If
you set the roaming function from a personal computer on the wireless LAN, you cannot to con-
nect to the AirStation. If it is the case, please refer to Chapter 3 Troubleshooting.
The AirStation Setting
Follow the on-screen instructions to complete the settings.
Enabling and Disabling Roaming Function
1
Refer to the "Displaying AirStation Setting Screen" section (page 29) in Chapter
2, What is Next?, and display the AirStation setting screen.
2
Click the Custom Setup button.
3
The followings are set and click the Set button.
Group Name: Enter the same group name for
all the AirStations in the same
roaming network.
Roaming:
Use.