Buffalo Technology WLA-L11 User Manual
Page 19
WLA-L11 User’s Manual
17
7
In the Network adapter field, enter the name of
the LAN card to be used, and then click the
Next button.
• If "Network Adapter Is Not Installed is displayed", the drivers for the wireless LAN card
have not been installed. Refer to the LAN board manual, and install the drivers.
• If "Network Adapter Settings Error is displayed", the TCP/IP settings have not been set
correctly. Refer to the "TCP/IP Protocol Setting" section (page 5) in the Preparing AirSta-
tion Settings, and correct the TCP/IP setting.
8
Windows will search for the AirStation.
9
Select the AirStation, and click the Next but-
ton.
If the AirStation cannot be found,
refer to ""Cannot Find AirStation" Is Dis-
played When Starting the Easy Installation
Wizard" section (page 43) in Chapter 3
Troubleshooting.
10
Click the Don’t Set button.
11
Your Web browser will start and the settings
screen will be displayed.
Continue to next page