3 operation, 1 manual operation 3.2 operation via «ic net, Settings in the "762 ic interface" window – Metrohm 762 IC Interface User Manual
Page 25: Event output lines, 3operation, 1 manual operation
3.1 Manual operation
762 IC Interface
21
3
Operation
3.1
Manual operation
Switch instrument on/off
The 762 IC Interface 762 is switched on and off using mains
switch 11 on the front of the instrument (see Fig. 2 and Fig. 4).
After the instrument has been switched on the mains pilot lamp 22
lights up to show that the instrument is ready for use.
Start/stop determination
RUN/
STOP
Determination on System 1 or System 2 can be started or
stopped manually using the key 33 or key 55.
RUN:
Manual start of a determination (
Start determination
).
STOP: Manual stop of a determination or data acquisition (
Stop
determination
or
Stop data acquisition
).
This function is only available if the
Second press of
Run/Stop button means 'stop' when measuring
option is en-
abled in the
762 IC Interface
window.
The status display 4
4 or 66 within the RUN/STOP key 33 or 55 have
the following meaning:
LED dark:
No system loaded
LED lit up:
Instrument ready (waiting for external start)
LED flashes:
Determination running