Metrohm 762 IC Interface - Manual (Page 33)

4.1 Technical data
762 IC Interface
29
4 Appendix
4.1 Technical data
Mains connection
Voltage 100...240 V
Frequency 50...60 Hz
Power consumption 7 VA
Fuse 2 × 1 ATH (to be replaced by Metrohm Service
only using the same type)
Additional electronic overload protection
PC interface (RS232)
Connector Dsub connector 9 pin (male)
1 5
9 6
Baud rate 1'200 … 115'200
Data bits 8
Stop bits 1
Handshake Xon/Xoff, none
Parity none, even, odd
FIFO 0 … 16 Bytes
Pin assignment Pin 1,4,6: internally connected
Pin 2:
RxD (Received Data)
Pin 3: TxD (Transmitted Data)
Pin 5: GND (Signal Ground)
Pin 7,8: internally connected
RS232 interfaces
Connector Dsub connector 9 pin (male)
1 5
9 6
Baud rate 1'200 … 115'200 (for Dev. 8 1'200 … 19'200)
Data bits 7, 8
Stop bits 1, 2
Handshake Xon/Xoff, none
Parity none, even, odd