Metrohm 762 IC Interface User Manual
Page 32
Advertising
3 Operation
762 IC Interface
28
Events setup
The
Events setup
tab of the
762
System [#]
window contains the
startup
values for the seven event output lines of system 1 or system 2 of the
762 IC Interface. These startup values are sent each time the system is
connected or a determination is started.
Each event output line can be set to the following values:
0
Line off, inactive (open)
1
Line on, active (0 V)
For technical data to the event output lines see section 4.1.
Advertising