27 events configuration – Metrohm 762 IC Interface User Manual
Page 31
3.2 Operation via «IC Net»
762 IC Interface
27
Events configuration
On the
Events configuration
subtab user-defined event commands can
be defined, which can be inserted into a time program after being acti-
vated with
<Activate>
.
Name (1
st
column)
User-definable name of the event command
(e.g.
Start_766
).
Event command (2
nd
column)
Setting the event output lines 1
…
7.
Selection:
0
(line off, inactive, open)
1
(line on, active, 0 V)
p
(pulse, pulse length 150 ms)
*
(leave line in current status)
For entry of the first value, enter
1
,
0
,
p
or
*
. For
entry of the other values, move the cursor in
front of the value to be changed and enter
1
,
0
,
p
or
*
.
<Add>
Add new remote command.
<
Delete
>
Delete selected remote command.
<Activate>
Activate the defined remote commands for in-
sertion into the time program.