Bosch HBC86K7.0 - Manual (Page 27)

27
The oven must not be switched on. Press the j
cklock button thrice and change the end time.
A signal sounds. The oven switches off. The display
shows End time" or Oven cooling". The clock
reappears in the display when you press the Stop
button.
Press the Stop button once.
You can change the setting while the symbol is
flashing.
The setting has been adopted if the symbol is lit.
In the meantime, you can call up the preset time,
duration and end time. To do so, press the j clock
button.
Rapid heating
This allows you to heat up the oven particularly
quickly. The rapid heating function is not suitable for
all types of heating.
Top/bottom heating
Intensive heat
Hot air
3D hot air
Rapid heating is also suitable for the types of heating
that combine the oven and microwave.
The set cooking time will only begin after the
preheating time has elapsed.
7.
Press the Start button.
The setting is adopted. The
display will show the end time
until the oven switches on.
The ! end time symbol lights
up. The oven switches on at
the appropriate time.
To change the end time.
The cooking time has
elapsed
Cancelling the setting
Note
Suitable types of heating