Bosch HBC86K7.0 - Manual (Page 28)

28
1.
Set the oven as required.
2.
Press the rapid heating button y.
The symbol y is shown in the display.
3.
Press the Start button.
The oven will heat up.
You will hear a short signal. The y symbol will go out.
Put your dish in the oven. Press the Start button
again. Only at this point does the preset duration
begin counting down.
Press the rapid heating button y. The symbol will go
out. The rapid heating process is cancelled.
Press the Stop button. To continue rapid heating,
press the Start button again.
The rapid heating function will not work if the
temperature set is below 100 ºC.
If the temperature in the oven is only slightly below the
temperature set, the rapid heating function is not
necessary. It will not switch on.
Setting the oven and microwave in
combination
On this setting, a type of heating is in operation at the
same time as the microwave.
You cannot combine the 900 W microwave setting
with a type of heating. If you try to do this, Not
possible" appears in the display.
You can set up to three microwave settings and
times, but only one type of heating and temperature.
You can set a duration of up to 1 hour and
30 minutes.
Setting procedure
Rapid heating is complete
Cancelling the rapid
heating function
Pausing
Notes