Bosch HBC86K7.0 - Manual (Page 57)

57
Malfunction Notes/remedial action Possible cause
Faulty control Switch the appliance off using the
fuse in the fuse box. Wait
approximately 10 seconds and
then switch it back on.
Three zeros flash in the clock
display.
Power cut Reset the time.
The oven is not in operation. A
cooking time appears in the
display.
The rotary knob was
accidentally pressed.
Press the Stop button.
The Start button was not
pressed after the setting had
been made.
Press the Start button or clear the
setting by pressing the Stop
button.
The microwave does not switch
on.
The door is not properly
closed.
Check whether leftover food or a
foreign object is trapped in the
door.
The Start button was not
pressed.
Press the Start button.
The food takes longer than usual
to heat up.
The microwave setting is too
low.
Select a higher microwave setting.
You have placed a larger
amount of food than normal in
the oven.
Double the amount = almost
double the cooking time.
The food was colder than
usual.
Stir or turn the food during
cooking.
A 5" is shown in the clock
display.
The safety switchĆoff was
activated. The oven was
operated for a long period
without the setting being
changed.
Press the Stop button.
The clock display contains the
error message E1" or E2".
The temperature sensor has
failed.
Call afterĆsales service.
It is possible to use the microwave
function alone.