Bosch HBC86K7.0 - Manual (Page 58)

58
Malfunction Notes/remedial action Possible cause
The clock display contains the
error message E9", E10", or
E11".
The microwave has a
malfunction.
Press the Stop button. The fault
message goes out. Start
microwave operation again. If the
fault message appears again,
please call the afterĆsales service.
It is possible to operate the oven
without the microwave.
The clock display contains the
error message E16" or E17".
Technical fault. Contact the afterĆsales service.
Microwave operation is
cancelled for no obvious reason.
The microwave has a fault. If this fault occurs repeatedly,
please call the afterĆsales service.
It is possible to operate the oven
without the microwave.
Repairs may only be carried out by fully trained
afterĆsales service engineers. Incorrect repairs may
result in serious injury to the user.
The oven lightbulb can be replaced. HeatĆresistant
12ĂV 20ĂW halogen bulbs are available from the
afterĆsales service or in specialized stores.
When removing a new halogen bulb from the
packaging, always use a dry cloth. This will increase
the life of the bulb.
1.
Switch off the fuse in the fuse box or unplug the
oven at the mains.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Remove the glass cover. To do this, open the
glass cover at the bottom with your hand.
If it proves difficult to remove the glass cover, try
using a spoon. (Fig. A)
Replacing the oven
lightbulb
Method
A