Trebor Q-Series Di Water Heater - Manual (Page 9)

Q-SERIES DI HEATER OPERATION / MAINTENANCE MANUAL PAGE 9
3. Insert key and unlock the rotary disconnect lock located at the top left
of rotary disconnect device (see Figure 2-2). Remove the key.
4. Move the rotary disconnect shaft to the "ON" of “1” (up) position.
5. Press the machine start button. The machine should start.
Figure 2-2: Lockout Key Location on Main Breaker
2.4 SEISMIC PROTECTION
It is the user ’s responsibility to adequately secure and anchor the
equipment to comply with local regulatory agency seismic requirements.
Mounting holes for anchors are provided at the bottom of the cabinet
enclosure. See Facility Layout in Appendix for mounting hole locations.