Baseline Systems BaseStation 6000 - Manual (Page 85)

P a g e | 77
To change the zone picture
1. Click the Adjust Zone tab.
2. On the line for the zone image that you want to change, click the Actions button.
3. Click Picture. The Zone Map dialog box opens and displays the image.
4. Click the Browse for Picture button.
5. Use the Open dialog box to find the new image that you want to associate with the zone.
6. Click once on the image to select it, and then click Open. The Zone Map dialog box opens again.
7. Verify that the Base Unit number and Zone number are for the zone in the selected image.
8. Click Return. The Zone Map dialog box closes.
Adding Zone Notes
If you have information that you want to associate with a zone, you can add it to the Zone Notes.
1. Click the Adjust Zone tab.
2. On the line for the zone that you want to add notes to, click the Actions button.
3. Click Notes. The Notepad window opens and displays the date and time for the note.
4. Type the note under the date and time.
5. Click the File menu, and then click Exit. A Notepad message prompts you to save the changes to the note.
6. Click Save.
Note: The BaseStation 6000 system automatically assigns a filename to the Notepad file.
Adding Base Notes
If you have information that you want to associate with a Remote Base Unit, you can add it to the Base Notes. Base Notes can
serve as reminders because you can configure them to automatically display a number of days in the future.
To add a base note
1. On the Main Page of the BaseStation 6000 software, click the Remote Base Unit that you want to add notes to.
2. Click the Information tab to activate the Main Menu.
3. On the Main Menu, click Window.
4. Click Notes and Pictures, and then click Base Notes.
5. On the Base Notes menu, click Add Base Note. The Activate Reminder dialog box displays.
6. In the Setup Reminder field, type the number of days until the reminder displays, and then click OK. The Notepad window
opens.
7. In the Notepad window, under the current date and time heading, type your note.
8. When you finish adding your note, click the X in the upper-right corner of the Notepad window.
9. When you are prompted to save your changes, click Save. Notice that the filename matches the Remote Base Unit serial
number and the file will be saved in the correct directory on your computer’s hard drive.