BlueAnt Q1 Voice Controlled Headset - Manual (Page 19)

19
Multiple Calls (Call Waiting)
If you receive a call while you are already on a call, and your phone and phone network both support
call waiting, then you can use the Q1 buttons to either end your current call or put it on hold and take
the incoming call.
When you have a call waiting the Q1 will play a sound to alert you to the incoming call.
• To put your current call on hold and answer the incoming call, hold down the "Vol +" button for 1
second.
• To end the current call and answer the incoming call, hold down the "Vol -" button for 1 second.
• Once you have a call on hold, you can switch between the two calls by holding down the "Vol +"
button for 1 second.
If you have a call on hold and your active call ends, either because the other party hung up, or because
you ended the call by double-clicking the BlueAnt button, then the other call will remain on hold. Hold
down the
"Vol +" button for 1 second to release the hold and resume the call.
Multipoint: Receiving Calls on Both Phones
The Q1 supports multipoint technology. This means that you can use one Q1 headset with two
different mobile phones or Bluetooth devices at the same time: if either phone rings, you can answer
it with the Q1.
If you have two phones connected to the Q1, and you receive a call on one of them while you are
already on a call on the other phone, then you can use the Q1's buttons to answer the second call.
• To put your current call on hold and answer the incoming call, hold down the "Vol +" button for 1
second.
• To end the current call and answer the incoming call, hold down the "Vol -" button for 1 second.
• Once you have a call on hold, you can switch between the two calls by holding down the "Vol +"
button for 1 second.
You can also answer the call on the second phone using that phone's handset. However, if you do
this, some phone models will keep the audio for that call on the handset, while other phone models
automatically route the audio back to the Q1, putting your first call on hold. In order to be certain
about where you will hear the audio, you are therefore recommended to always use the Q1 buttons if
you want to answer the call.