BlueAnt Q1 Voice Controlled Headset - Manual (Page 37)

37
"Teach Me"
Use the "Teach Me" command to access the following options that help you learn about your Q1.
When you say "Teach Me" the Q1 will read out the commands available on the "Teach Me" menu. You
must wait for the Q1 to finish reading the commands before you can say one of the commands.
Command Say This To...
"Try It Now" Practice the voice commands: the Q1 will read out each command
for you to repeat back.
"Speed Dial Setup" Learn about how speed dial settings work in the Q1.
For more information about setting up speed dials, see "Setting
Up Speed Dials" (page 23) .
"Tips and Tricks" Hear some tips on using your Q1.
Button Functions
You can use the Q1's buttons to access some of the device's advanced features. You can also turn off
voice control and use the buttons instead.
Only some of the functions are available at any given time (for example, the functions for answering
a call are only available when the phone is ringing). The "When" column in the table below explains
when you can use each function, based on the following different states that Q1 can be in:
• Off: The Q1 is switched off.
• Idle: The Q1 is switched on but is not connected to any mobile devices.
• Standby: The Q1 is switched on and connected to a mobile device, but not currently on a call.
• Ringing: The Q1 is switched on and connected to a mobile device and the phone is ringing.
• Active Call: The Q1 is switched on, connected to a mobile device, and there is an active call on
the connected device.
• 3 Way Call: The Q1 is switched on, connected to a mobile device, and there are two calls on the
connected device (either call waiting, where one call is active and the other is on hold, or a call
conference where all three callers are connected at the same time).
Function Button How Long When Notes
Switch the Q1 On Hold for 3
seconds Off You will hear a sound indicating that the
Q1 is switching on.