BlueAnt Q1 Voice Controlled Headset - Manual (Page 23)

23
Setting Up Speed Dials
The Q1 is designed to allow you to use speed dials so that you can make calls just using your voice.
The easiest way to use speed dialing with the Q1 is to use your phone's speed dial settings. Simply
use the voice commands
"Call Speed Dial 1" to "Call Speed Dial 8" and the Q1 will attempt to call the
number stored in the corresponding speed dial on your phone.
The other method of speed dialing is to store numbers in the Q1 headset itself. In order to program
speed dials into the Q1, you must first receive a call from the number you want to save.
Some phones do not adhere to the Bluetooth specification for speed dialing. If this is the case with
your phone, then you will not be able to use the first method of speed dialing, and you will have to set
up your speed dials in the Q1 itself.
Numbers stored in the Q1 headset take precedence over numbers stored in your
phone.
For example, if you use the command "Call Speed Dial 3" and you have stored a number in the Q1's
speed dial 3 setting, then the Q1 will call this number. If you have not stored a number in the Q1 for
speed dial 3, then it will attempt to call the number stored in the speed dial 3 slot on your phone.
To Set Up Speed Dials in the Q1 Headset
1. Wait until you receive a call from the number you want to store.
2. When the call finishes, press and hold "Vol -" on the Q1 for 1 second.