Scan settings dialog box – Canon mp620 User Manual

Page 472

Advertising
background image

Advanced Guide

>

Scanning

>

Scanning with the Bundled Application Software

>

MP Navigator EX Screens

> Scan

Settings Dialog Box

Scan Settings Dialog Box

The Scan Settings dialog box opens when you click Specify... in the dialog box that opens when scanning
from the One-click Mode screen or the Custom Scan with One-click tab.

In the Scan Settings dialog box, you can make advanced scan settings.

Important

The displayed items vary by document type and how the screen was opened.

Note

The Scan Settings dialog box can also be opened by clicking Specify... on the Scanner Button
Settings tab of the Preferences dialog box.

Document Type

Select the type of document to be scanned. When Auto Mode is selected, the document type is
automatically detected.
In that case, Color Mode, Document Size, etc. are automatically set as well.

Important

To scan correctly, select a document type that matches the document to be scanned.
When opened from the Scanner Button Settings tab, the Document Type specified in the Scanner
Button Settings tab is displayed and cannot be changed in this dialog box.

Color Mode

Select how to scan the document.

Color

This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).

Grayscale

This mode renders the image in 256 levels (8 bit) of black and white.

Black and White

This mode renders the image in black and white. The contrast in the image is divided at certain
levels (threshold level) into black and white and is rendered in two colors.

Note

Color Mode is not displayed in the Scan Settings dialog box opened from the Scanner Button
Settings tab.

Document Size

Select the size of the document to be scanned.
When you select Custom, a screen in which you can specify the document size appears. Select a
Units, then enter the Width and Height and click OK.

Page 472 of 815 pages

Scan Settings Dialog Box

Advertising