Canon mp620 User Manual
Page 773
Key Format
ASCII
5 characters
13 characters
Hexadecimal (Hex)
10 digits
26 digits
2.
Key Length
Select either 64bit or 128bit.
3.
Key Format
Select either ASCII or Hex.
4.
Key ID
Select the Key ID (index) set to the access point.
5.
Authentication
Select the authentication method to authenticate the printer's access to the access point.
Normally, select Auto. If you want to specify the method manually, select Open System or
Shared Key according to the setting of the access point.
Important
If the printer cannot communicate with the computer after the encryption type of the printer
was switched, make sure that encryption types for the computer and the access point
matches that set to the printer.
How to set a WEP/WPA/WPA2 Key
Page top
Page 773 of 815 pages
Changing the Settings in the Wireless LAN Sheet