Canon mp620 - Manual (Page 646)

Print settings
LAN settings
Advanced settings
Mobile phone print setting
Bluetooth settings
PictBridge print settings
Language selection
Reset setting
Plain paper feed settings
Specifies the paper source for A4, Letter, A5, and B5 plain paper.
Note
A4, Letter, A5, and B5 paper can be loaded in the Cassette. Load on the Rear Tray for the
other sizes of paper.
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Important
Be sure to set this back to OFF after printing since it may result in lower printing speed or
lower print quality.
Extended copy amount
Selects the amount of image that extends off the paper when printing in Borderless (full).
Important
This setting can be applied only when copy or easy photo reprint mode is selected.
Note
If printouts contain margins even though you are printing in Borderless, specifying Large
for this setting may help solve the problem.
LAN settings
Change wireless/wired
Activates wired or wireless LAN.
Note
When you change the connection method (wired or wireless), set up the machine
according to the method you will use. For details, refer to your setup manual.
Wireless LAN settings
Selects the setting method for wireless LAN connection.
WPS setting
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS).
Select Push button method or PIN method according to the method your access point
supports, then follow the on-screen instructions.
WCN setting
Select when you perform settings for wireless LAN using Windows Connect Now (WCN)
feature. You need a USB flash drive on which settings for wireless LAN are saved.
Wireless LAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items Setting (IPv4) Setting (IPv6)
Page 646 of 815 pages Changing the Machine Settings on the LCD