Canon mp620 - Manual (Page 647)

Connection Active/Inactive Active/Inactive
SSID XXXXXXXXXXX XXXXXXXXXXX
BSSID XX:XX:XX:XX XX:XX:XX:XX:XX:XX
Communication
mode Infrastructure Infrastructure
Channel XX XX
Data encryption Disable/WEP/TKIP/AES Disable/WEP/TKIP/AES
Network
authentication Auto/Open system/Shared key/WPA
-PSK/WPA2-PSK Auto/Open system/Shared key/WPA
-PSK/WPA2-PSK
IP address XXX. XXX. XXX. XXX XXX. XXX. XXX. XXX.
XXX. XXX. XXX. XXX
Subnet mask XXX. XXX. XXX. XXX -
Subnet prefix
length - XXX
Default gateway XXX. XXX. XXX. XXX XXX. XXX. XXX. XXX
MAC address XX:XX:XX:XX:XX:XX XX:XX:XX:XX:XX:XX
WEP bit 128, 64 128, 64
Destination XX XX
IPsec Settings - Active/Inactive
Security protocol - ESP/ESP & AH/AH
Pre-shared key - XXXXXXXXXXX
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
Wired LAN setting list
The list of wired LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items Setting (IPv4) Setting (IPv6)
Connection Active/Inactive Active/Inactive
IP address XXX. XXX. XXX. XXX XXX. XXX. XXX. XXX.
XXX. XXX. XXX. XXX
Subnet mask XXX. XXX. XXX. XXX -
Subnet prefix length - XXX
Default gateway XXX. XXX. XXX. XXX XXX. XXX. XXX. XXX
MAC address XX:XX:XX:XX:XX:XX XX:XX:XX:XX:XX:XX
IPsec Settings - Active/Inactive
Security protocol - ESP/ESP & AH/AH
Pre-shared key - XXXXXXXXXXX
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
IPv4/IPv6 setting
Selects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.
WSD setting
Activates/inactivates the WSD (one of the network protocols supported in Windows Vista)
setting.
Note
When you set WSD setting to Active, the printer icon is displayed on the Network Explorer
in Windows Vista.
Reset LAN settings
Initializes the network settings on the machine.
Important
Note that initialization erases all connection settings with computers, and printing or
Page 647 of 815 pages Changing the Machine Settings on the LCD