Canon mp620 - Manual (Page 87)

The machine may make operating noise when the Print Head Holder moves to the replacement
position.
3.
Replace the ink tank with the lamp flashing fast.
Push the tab (A) and lift the ink tank to remove.
Do not touch the Print Head Lock Lever (B).
Important
Handle the ink tank carefully to avoid staining of clothing or the surrounding area.
Discard the empty ink tank according to the local laws and regulations regarding disposal of
consumables.
Note
Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one
when replacing two or more ink tanks.
For details on ink lamp flashing speed, see Checking the Ink Status .
4.
Prepare the new ink tank.
(1) Take the new ink tank out of its package, pull the orange tape ( ) in the
direction of the arrow to peel it off, then remove the film ( ).
Important
Make sure that the film is completely removed from the air hole (C). If the air hole is blocked
with the remaining film, ink may leak out or may not eject properly.
(2) Hold the orange protective cap (D) as indicated in the figure below, then twist
and remove it from the bottom of the ink tank.
Remove the protective cap while holding it to prevent the ink from staining your fingers.
Discard the protective cap once it is removed.
Page 87 of 815 pages Replacing Procedure