Canon mp620 - Manual (Page 594)

is your machine's name).
If you are required to input a passkey, input the default value "0000".
You can change the device name of the machine, passkey, and so on from the Bluetooth
settings screen.
Changing the Bluetooth Settings
Note
Communication is possible in a range of up to about 33 ft. / 10 m depending on the
conditions below. Printing speed may vary depending on the following conditions:
Presence of obstacles between the communication equipment, and radio conditions.
Presence of magnetic fields, static electricity, or electromagnetic interference.
Receiver sensitivity and antenna performance of the communication equipment.
Video files cannot be printed.
Depending on your device, data saved on a memory card may not be printed.
About transmittable data
Due to security settings on the mobile phone, downloaded content or photos
downloaded from a URL attached to an E-mail cannot be printed.
Depending on the size of a photo, it may take a while for this machine to start
printing after starting wireless communication.
Printed quality and orientation (portrait or landscape) is determined automatically
according to the shot photo size.
Depending on the photo size shot on the mobile phone, the edges of the image
may be cut off when performing borderless printing; the margin size may change
when printing with borders.
If the photo file is over 1.8 MB in size, it may not be possible to send the file.
Page top
Page 594 of 815 pages Printing via Bluetooth Communication