ITC ProTime Microcoagulation System - Manual (Page 27)

27
FOR PROFESSIONALS ONLY - PROGRAM MODE
Note: The Program Mode feature is only available to professional users. The following
information is not contained in the Operator’s Manual for patients performing self-testing.
For PROTIMEPRO, to access the Professionals Only section of the training CD, enter the following
code when prompted by the software: 54321 (the training CD is not provided with PROTIMEINT).
If the PROGRAM MODE option is selected from the SET UP Menu, the following screen appears:
Note: The PROGRAM MODE option is password protected. The default password in a newly
manufactured instrument is 000000, which the user can then change to a password of their
own choosing (see the Change Password section). If you forget or lose your password, an
emergency password is available from ITC Technical Support by calling 1-732-548-5700,
1-800-631-5945, or e-mail us at [email protected].
If the entered password matches the password stored in the instrument, the instrument will enter the
PROGRAM MODE. If the entered password is incorrect, the user will be given two more chances to enter the
correct password in the ENTER PASSWORD screen. After three unsuccessful attempts to enter the correct
password, the program will return to the MAIN MENU and the user should contact ITC Technical Support.
After performing all programming functions the user will return to the MAIN MENU.
After the correct password has been entered the PROGRAM MODE menu screen appears:
SET MM/YYYY
Selecting SET MM/YYYY (set month and year) will guide you through the following sequence of screens:
Change the month by pressing the button until the correct month appears.