ITC ProTime Microcoagulation System - Manual (Page 30)

30
CHANGE PASSWORD
If CHANGE PASSWORD option is selected from the PROGRAM MODE menu, the user must enter the
password (up to 6 digits) as a left justified number without any blanks. The rules for entering a numerical
PID or OID are also applicable for entering the 6 digit numerical password (see page 24).
After password has been entered, the CONFIRMATION OF PASSWORD screen appears:
If the button is pressed, the newly entered password is accepted by the instrument. If the button is
pressed, the user will repeat the change password procedure by returning to the previous CHANGE
PASSWORD screen.
Note: Upon manufacturing, the default password is set to 000000.
CLEAR MEMORY
Upon this selection from the PROGRAM MODE menu all results will be erased from the instrument
memory. To prevent accidental loss of data, the following confirmation screen will precede the data
removal from the instrument memory:
Selecting NO will return the instrument to the MAIN MENU, and no results will be erased from the
instrument memory.