View button, Crestron chv-tstat and chv-thstat thermostats, Humidifier (chv-thstat only) – Crestron electronic CHV-TSTAT User Manual

Page 27: Crestron system, Global update, Humidity

Advertising
background image

Crestron CHV-TSTAT and CHV-THSTAT

Thermostats

Humidifier Screen

MODE

VIEW

T

T

Humidifier

ENABLED DISABLED

3. Humidifier (CHV-THSTAT ONLY)

Pressing the MODE button displays the “Humidifier” screen.

Use the up ▲and down ▼arrow buttons to select ENABLED or
DISABLED.

Crestron System Screen

MODE

VIEW

T

T

Crestron Sys

ONLINE HOLD

4. CRESTRON SYSTEM

Pressing the MODE button again displays the Crestron System screen.
Use the up ▲and down▼arrow buttons to select ONLINE or HOLD.

ONLINE – Data flows both ways, to and from the thermostat, enabling

adjustment from a remote location.

HOLD – Data flows one way, from the thermostat, blocking system

commands to change the temperature and humidity when you do
not want the current settings reset.

Global Update Screen

MODE

VIEW

T

T

Global Update

SEND

5. GLOBAL UPDATE

Pressing the MODE button again displays the Global Update screen. Allows
a single thermostat location to update the current temperature settings to all
other thermostats on the system, provided that this function has been defined
in the Crestron program.

Press the down▼ button to send the update.

Pressing the MODE button again returns you to the Main Screen

VIEW

VIEW Button

The following screens are accessed by pressing the VIEW button:

1. Humidity (If enabled in Setup)

2. Outdoor (If enabled in Setup)

3. Messages

NOTE: If enabled, the VIEW button also allows access to the remote button
function screens. When part of a Cresnet system, the up ▲ and down ▼
arrow buttons can be used to enable other functions (i.e., lighting control,
alarm system, etc.).

Humidity Screen

MODE

VIEW

T

T

Humidity

30

%

24

%

1. HUMIDITY

Press the VIEW button to display the “Humidity” screen.

Use the up ▲and down ▼arrow buttons to adjust the Humidity Set Point
level (CHV-THSTAT only). This page only appears if enabled in the setup.
Refer to “HUMIDIFIER/FAN OPTIONS” on page 17.

NOTE: If a CHV-RTHS temperature/humidity sensor is installed, a CHV-
TSTAT can import and display the humidity.

Operations and Installation Guide – DOC. 8163B Thermostats:

CHV-TSTAT and CHV-THSTAT

23

Advertising