Crestron electronic CHV-TSTAT - Manual (Page 8)

Thermostats Crestron CHV-TSTAT and CHV-THSTAT
Physical Description
Refer to the illustrations below and on next page. The CHV-TSTAT and CHV-
THSTAT are enclosed in a plastic enclosure with four buttons and an LCD display
on the front. The back of the unit has ventilation slots, and holes for mounting the
unit and wiring. The ventilation slots must be unobstructed for airflow to the unit.
Physical View of CHV-TSTAT and CHV-THSTAT
66
o F
43 %
68 o F
HEATING
HEAT ONLY
ON LINE
H1 H2 AX
Current Set Point
(indicates desired
temperature, or
temperature range in
auto mode)
Current Activity
Current Function
System Information
- ON LINE (Cresnet
on)
- HOLD (Cresnet
off)
- NET FAULT (Net
down)
- VIEW MSG (view
message)
Internal Relay Status
Current Temperature
Current Humidity
3.27 in
(8.29 cm)
3.38 in
(8.59 cm)
4.630 in
(11.76 cm)
3.75 in
(9.50 cm)
5.00 in
(12.70 cm)
MODE
VIEW
1.04 in
(2.63 cm)
0.47 in
(1.18 cm) Front and Side Views
Rear View
1.75 in
(4.44 cm)
4 • Thermostats: CHV-TSTAT and CHV-THSTAT Operations and Installation Guide – DOC. 8163B