Crestron electronic CHV-TSTAT - Manual (Page 28)

Thermostats Crestron CHV-TSTAT and CHV-THSTAT
Outdoor Screen
MODE
VIEW T
T
Outdoor
o F
32
2. OUTDOOR
Press the VIEW button again to display the “Outdoor” screen. This allows
the user to view the outdoor temperature (if an outdoor sensor has been
installed) and outdoor humidity (if available). Outdoor temperature/humidity
can come from an outdoor sensor wired directly to the thermostat or through
the Cresnet system from another source. This page is only displayed if
enabled in the setup. Refer to “SCREEN OPTIONS” on page 18.
NOTE: This is only a display and not for system activation. This display can
be shown on either the CHV-TSTAT or the CHV-THSTAT.
Messages Screen
MODE
VIEW T
T
Messages
Emergency Gen in Use
<CLR
3. MESSAGES
Press the VIEW button again to display the “Messages” screen. This screen
allows the user to view any text messages sent from the control system (Only
when part of a Cresnet system). Text messages are limited to 4 lines,
approximately 20 characters per line (including spaces). Allow for word
wrap by staying within the 20 characters/spaces per line maximum. The
thermostat auto-hyphenates when nearing the end of a line. You may use
carriage returns to force a line change.
Press the MODE button to clear (CLR) the message(s). Acknowledges to the
control system that the message has been read.
NOTE: This screen only appears when there is a message.
24 • Thermostats: CHV-TSTAT and CHV-THSTAT Operations and Installation Guide – DOC. 8163B