Baumer N 150 - Manual (Page 10)

N 150
www.baumer.com 10
4.2.8. Indicate optional column of figures in bottom line „u“ (75h)
The command is utilized to indicate a 5-digit column of figures in the bottom line of the display. The number is
indicated less dot respectively comma. Preceding zeroes as well as both arrows are suppressed. The upper line
still indicates the actual target or column of figures.
The column is indicated until any optional command except „t“, „u“ or „R“ is received by the interface. The
number will be retained after power failure.
Example: (column of figures = 012345)
SOH Adr Cmd Column of figures = 012345 EOT CRC
Transmission
01h 20h 75h 30h 31h 32h 33h 34h 35h 04h B6h
SOH Adr Cmd Column of figures = 012345 EOT CRC
Response
01h 20h 75h 30h 31h 32h 33h 34h 35h 04h B6h
Note:
Command “t” in conjunction with command “u” enables indication of a 10-digit number.
Both columns are not saved in EEPROM.