Terminal assignment – Baumer N 150 User Manual
Page 4
N 150
www.baumer.com
4
2. Terminal assignment
Pin Assignment
Core
colour
DIN47100
IEC757
Pin 1
Tx/Rx-, RS485
white
orange
Pin 2
Tx/Rx+, RS485
brown
brown
Pin 3
sensor supply +24 V
yellow
red
Pin 4
sensor supply 0 V
green
black
male connector M8
female connector M8
2
4
3
1
2
4
3
1
Pin Assignment
Core
colour DIN47100
IEC757
Pin 1
sensor supply +24 V
yellow
red
Pin 2
sensor supply 0 V
green
black
Pin 3
--
--
--
Pin 4
Tx/Rx+, RS485
brown
brown
Pin 5
Tx/Rx-, RS485
white
orange
male M16
female M16
2
1
3
4
5
2
1
3
4
5
Connect power supply that is free from interference emission. The supply must not be used as
parallel supply of drives, shields, magnetic valves, etc.
Apply DC according to the terminal assignment
Power supply: 24 VDC ±20 %
Shield
Use shielded cables only. Ground of the shield must be provided at the machine (two examples
corresponding to the cable applied, see drawings).
Abschirmungsanschluss